Falc Kappa
- Floating clevis hitch with Cat 2 pins
- Front square tube 80mm x 120mm x 8mm
- 1000 rpm PTO
- Drive shaft with 1 3/4″ 20 spline yoke and automatic torque limiter clutch
- 300hp, three (3) speed, lever change gearbox producing rotor speeds of 246, 308 and 356rpm
- Rear PTO for ancillary equipment
- Gear side drive
- 3 blade rotor pattern – ‘L’ blades fitted as standard
- Depth control via rear, 8 tube, hydraulically adjusted cage roller
- Coiled spring adjusters on the trailing board
- Full CE safety guarding on all models
- Oil cooler kit on all models
- Double (sleeved) rotor tube on Kappa 4000 and Kappa 4500
- Kappa 6000 DT/2 has dual lateral drives and two (2) independent rotors
| Model # | Working width, A mm. | Approx Total Width in Inches | Total Width B mm | Approx Total Width in Inches | KG. | LBS. | N. of Blades | N. of Blades | HP |
|---|---|---|---|---|---|---|---|---|---|
| KAPPA 4000 | 4115 | 162″ | 4320 | 170″ | 2690 | 5930 | 96 | 80 | 190-300 |
| KAPPA 4500 | 4615 | 181.6″ | 4820 | 189.7″ | 3090 | 6813 | 108 | 90 | 190-300 |
| KAPPA 6000 DT-2R* | 6322 | 248.8″ | 6620 | 260″ | 3920 | 8642 | 144 | 120 | 190-300 |
More Falc Products
